Email us your requirements!
























 


SnapLock / 2 Part Resin / SnapLock Cable Dimensions /



E-CPJ SnapLock Cathodic Protection Resin Cable Jointing Kits.






  Cathodic protection resin filled jointing kits for         
  Un-armoured Plastic / Rubber insulated cables from 
  600V to 1,000V (1kV).      
Designed for use on Low Voltage Plastic / Rubber insulated cables from 600 Volt up
to 1kV (1,000 Volts).

A strong clear moulded body with ECPJ SnapLock connection designed for tight
seal stepped cable entry cut off points for
all cable diameters. Large molded shell enables Crimp, Bolt or Line tap connectors
to be used, simple!


Designed for use on Rubber / Plastic insulated cables up to 1,000 Volts.



An ideal product for Single core un-armoured Tee Jointing or Branch Jointing rated up to
1kV above ground and below ground.
ECPJ SnapLock suits mains cable single core with maximum sizes up to 95 sq mm.
Branch single core up to 35 square millimetres. Also used on Cathodic Protection applications including Pipelines, Tanks and as discussed Buried structured installations.
Major applications: Consulting companies, Water companies, Gas companies, Oil companies, and Chemical industries.

Two (2) Types of Resin components, High Grade two component Polyurethane and a Epoxy Resin to insulate, Seal and increase Performance of electrical/electronic devices Operating temperature -40°C to 110°C

ECPJ/CPJ SnapLock Contact us





Pipeline Gas companies, Oil pipe line companies, Water companies Consulting companies.


 ECPJ or CPJ SnapLocks are the same products.          
SNAPLOCK ECPJ/CPJ


 Two Part Polyurethane Resin         
TWO PART POLYURETHANE RESIN


 Cable Jointing Dimensions.          
SNAPLOCK CABLE DIMENSIONS





/ Home / Disclaimer / 1997 © 2008 / Contact / SnapLock / 2 Part Resin / SnapLock Cable Dimensions /
RESIN CABLE JOINTING, Cathodic protection is a technique to control the corrosion of metal surfaces, cable jointing, and is used to protect from corrosion, cathodic protection systems are for plastic or rubber insulated cables from 600V / 1000 V. Ideal for single core unarmoured tee or branch jointing rated to 1kV, for above or below (underground) applications in Middle Eastern parts of the middle east. Suits mains cable single core maximum size up to 95 sq mm, branch core 35sq mm. Can also be used on pipelines, tanks and buried structures. bs7888, bs6910, bs 6910, bs 7888, resin traffic, resin buried cables, resin jointing, jointing kits, epoxy resin, epoxy resins, resin doming, resin domeing, cable jointing kit, cable jointing kits, kable jointing kit, corrosion control, cable splices, polurethane, cable splice, cathodic protection cable, cable, kable, resin, epoxy, resin splicing kits, protection, corrosion, polyurethane resin kits, polyurethane kits, epr jointing kits, pilc jointing kits, xlpe jointing kits, resin tenders, resin kit tenders,