RFQ PTFE TSWTF-1/8" T100T-X
EFWRAPTYPE3-1MR NSA849000T-030 NSA849000T-125
Are you looking for a far superior
material than T100T-X or NSA849000T255 or SW35 NA008 SW30
• SW31 • SW32 • SW33 • SW34 or SW35
NA008
This left & right side of this drawing below shows
the construction of the material when you receive it.
500024-1
| T38T-0 | NSA849000T-125
| T100T-0 | NSA849000T-255
| Panavia Aircraft GmbH
Approved
| |
Ensure you have
selected the correct material and size as
once your order has been placed it cannot
be cancelled or returned. Sizes: ID
1/8" (3mm) • ID
3/16" (5.0mm) • ID
(7.5mm) • ID
3/8" (9.5mm) are supplied on
continuous set reels with remainder
12.5mm up to 25.5mm in bag lengths.
GTB is superior to spiral
cut tube as it is always supplied with contoured
edges for
extra rigidity within a smaller X
sectional area, the contoured edges
prevents cutting into wires, cables
and/or conduits within the assembly unit.
Beaded contoured edges prevents chaffing
damage to the insulation if cables are
re-routed from the loom-wrap thus reduces
damage to wire and cables.
Our knowledge and marketing enables us to
recognize changes and developments to
markets needed for these interesting PTFE
components.
|
|
| |
PAN75 - AS41088 PANAVIA
standards state that these components should be supplied in 1500mm
lengths, but image if your design team
wanted a continuous length of 3 mtr or
5mtr then these AS41088 standard
size-lengths would be redundant, this is
why we supply the sizes 30, 50, 75, 100
on continuous reel lengths so you can cut
off at 3mtrs or 5mtrs and the remainging
sizes 125, 200, 255 and in addition we
can make subject to tooling size 300
(30mm) in varying (5-15mtrs) bag lengths
to set MOQs.
Are you looking around for an UK or
Exporter to make black or coloured PTFE
Spiral (Wrap) Binding to a very high
standard? We aim to make for you in any
colour. Colors & Colours: BLK-Black,
BRN-Brown, RD-Red, OR-Orange, YLW-Yellow,
GRN-Green, BLU-Blue, VLT-Violet,
GRY-Grey-Gray, WH-White, PNK-Pink,
NAT-Natural, CLR-Natural.
Metallic AU-Gold, AG-Silver, and even
Bronze is possible upon request.
FIT
only the best quality!
|
|
|
Comparison Chart
| ID 0.125" |
TSWTF-1/8" |
T12T- |
GTB 30 |
SW30 NA008 |
| ID 0.197" |
TSWTF-3/16" |
|
GTB 50 |
SW31 NA008 |
| ID 0.250" |
TSWTF-1/4" |
T25T- |
GTB 50 or GTB 75
|
|
| ID 0.296" |
|
|
GTB 75 |
|
| ID 0.375" |
TSWTF-3/8" |
T38T- |
GTB 100 |
SW32 NA008 |
| ID 0.500" |
TSWTF-1/2" |
T50T- |
GTB 125 |
SW33 NA008 |
| ID 0.750" |
TSWTF-3/4" |
T75T- |
GTB 200 |
SW34 NA008 |
| ID 1.000" |
TSWTF-1.00" |
T100T-X |
GTB 255 |
SW35 NA008 |
Thermal
Memory Ltd | 1998©2012 | Contact-us
for a Swift Quote | Disclaimer
| E&OE
Author : Seotopranking
SW30 NA008, efwraptype3-1mr, SW32
NA008, SW33 NA008,
SW34
NA008, SW35 NA008,
as41088-30-1500, as41088-50-1500, as41087, as41088-75-1500,
as41088-125-1500, as41088-255-1500, nsa849000n125,
t19t-c, t25t-L, T25T-LO, T38T-L, T50T-Q, T62T-Q, T100T-X,
TSWTF-1/8", TSWTF-3/16", TSWTF-1/4",
TSWTF-3/8", HT 1/8T1-100, HT 1/4 T1-100,
|
