PTFE Tubing • PTFE Sleeving • PTFE Spiral Binding • Ultra Smooth corugated tubing.


Standards :
..: BS 2848 Type 6 Class 250T :: BS-EN-ISO 13000 :: BS EN 60684 :: BS 6564 :: BS 6746C :: SBC :..



Data properties for PTFE - Polytetrafluoroethylene

PTFE Electrical
- - - - - - - - - - - - - - - - - - - - - - - - - - - -
Dielectric strength : 50kV/mm
Volume Resistivity : 10^18 ohm.cm
Surface Resistance : 10^17 ohm
Service Temperature : -200°C to +260°C
Melting Temperature : +330°C to +350°C
Thermal Conductivity : 0.2 to 0.5 w/m.k


 PTFE Mechanical
- - - - - - - - - - - - - - - - - - - - - - - -
Tensile Strength : 33M/mm²
Elongation at Break : 350 percent
Density : 2.15g/cm³
Shore Hardness : D55


PTFE is extremely hydrophobic & extremely stable at high temperatures of -70°C to +260°C These polymers retain their toughness & strength at sub zero temperatures makes them an ideal material for outer space technology and understandable for Audio lead wires which enhances the audio equipment. PTFE is almost unaffected by Ozone, Oxygen or UV light & has no aging properties.

PTFE PolyTetraFluoroEthylene has an extremely low co-efficiency of friction with superb non stick properties.

These materials have an outstandingly High dielectric strength of 50kV - 80kV/mm with a very high degree of high volume and surface resistivity.

PTFE Tubing - Metric wall & Imperial wall

PTFE Tubing BS-EN-ISO-13000, BS 2848 Type 6 250T, PTFE Imperial Tubing
PTFE Tubing BS-EN-ISO-13000, BS 2848-6 250T, PTFE Metric Tubing
PTFE Sleeving - Thin Wall, Standard Wall and Heavy Wall.

PAN6480 - AS41088 - PTFE Spiral Binding cut wraps

PTFE Corrugated Tubing - Light wall, Standard, Shallow, Deep, Ultra Smooth bore & Crush Resistant.

SBC: PTFE Smooth Bore tubing: It looks like a tubing, visibly it is like-no-other PTFE corugated conduit around. SBC has ultra tight convolutions, allows ease insertion of wires and cables and has excellent MBR (Minimum Bend Radius) of 19mm (3/4 inch). Kink resistant convoluted conduit, chemical inertness, solvent resistant, hydrophobic, anti-aging, non-flammable with unique electrical properties. One area could be antennae wire/cable insertion systems.

SBC: ID 6.8mm x OD 8.6mm • ID 10.0mm x OD 12.5mm • ID 13.5mm x OD 16.5mm • ID 16.5mm x OD 20.0mm • ID 20.0mm x 0D 24.4mm. Limited samples 6.8mm, 10.0mm & 13.5mm, only -X denotes colour: Natural

PTFE Spiral Binding

Spiral Binding : Sizes 3.2 to 25.4mm. Two new introduction sizes GTB100 & GTB200.
Special non-standard size - GTB30.0mm can also be made but to order with set lead times.

PTFE Multi-Lumen tubing - Multiple fluid paths.

All these PTFE insulated components comply with :

European Directive 2002/95/EC RoHS : Restrictions of the use of certain hazardous substances.
European Directive 2002/96/EC WEEE : Waste Electrical & Electronic Equipment.
European Directive 2003/11/EC : Restrictions on Marketing and use of certain dangerous substances.
European Regulation (EC) 1907/2006 : Registration, Evaluation, Authorisation & Restriction of Chemicals (REACH)


1997 © 2009, 2010

Heat Shrink Tubing  Disclaimer  PTFE enquiries  Link Building  PTFE tubing  Spiral Binding  PTFE shrink  
ptfe sleeving, conduit tubing, ptfe tubing, tfe tubing, 'tfe sleeving', ptfe spiral wrap, ptfe conduit, pan 6628, as 41088, pan6480k, 'spiral wrap', spiral tubing, corrugated tubing, convoluted tubing, 'nsa849000', 'defense corrugated', defence corugated, ptfe test leads audio, sptfe, music lead wires,